Steadyrack NA

<p>It is possible to install a tandem bike in a Steadyrack. However, the rack will need to be mounted higher to allow for the length of the tandem bike. You also need to ensure that the tandem bike doesn&apos;t exceed the maximum weight limit of the rack you have chosen. Please note, it can be more difficult to mount a tandem rack in a Steadyrack due to the length of the bike.&#xA0;</p>

It is possible to install a tandem bike in a Steadyrack. However, the rack will need to be mounted higher to allow for the length of the tandem bike. You also need to ensure that the tandem bike doesn't exceed the maximum weight limit of the rack you

Can I mount a tandem bike in a Steadyrack?

Design and Installation

What is the different between the ProFlex range and the Classic range?

Does the ProFlex fit most bikes?

Does the ProFlex still pivot?

Can it hold heavier bikes?

I have a fender/mudguard on my bike, will ProFlex work?

Is the ProFlex easy to install?

Can I use my existing drilled holes for my Classic rack to install my new ProFlex?

Will my Fat rack with fender be compatible with the ProFlex bike rack?

Will the ProFlex SteadySaddle damage my tires?

What is the difference between the saddle on the ProFlex range vs the eBike and Fender racks?

ProFlex

What is GearMate?

Can I use my Classic Range rack with GearMate?

Can my Steadyrack still pivot/swing if I install a GearMate?

How can I get more components for my GearMate?

What is GearMate made of?

What is the weight rating of the GearMate?

Does the installation of a SteadySpine behind a Classic Range rack (Classic, MTB, eBike, Fender, Fat) mean the rack sits slightly further off the wall?

How far will the GearMate extend along the wall from the rack?

GearMate

What's the difference between all the racks?

What do you mean by roll in, roll out?

Do all the racks pivot?

What is the function of the rear tire bracket/rest?

Will hanging my bike damage the bike frame, forks or wheels?

Do the racks swing freely/why doesn't my Steadyrack swivel easily?

My tires are jamming/getting stuck in the top of the rack.

Can I lock my Steadyrack into one position or any angle?

Does the bike have to be at 90 degrees to the wall when mounting or dismounting the bike?

How far will my bike stick out from the wall when pivoted against the wall?

How do Steadyracks save space?

Is it possible to use the Steadyrack with the rear wheel in the rack and the front wheel down?

Can I add a lock to my Steadyrack?

How do you get your bike in the front wheel position without lifting?

Why has my Steadyrack loosened?

Are the rack arms interchangable?

Why is there a break in the metal at the top of the rack near the washers?

Rack Function

Do you have a rack for small diameter wheels/kids' bikes?

Will 2.8 inch tyres fit in the mountain bike rack or does it need the fat rack?

Can I load a heavier bike into the rack than the maximum weight limit?

Are Steadyracks bike racks safe to use for bikes with hydraulic brakes/forks/suspension?

How does the Steadyrack handle carbon wheels on road bikes?

How secure are the Steadyrack D Lock and Cables?

Is it safe to store a bike with thinner tires in a wider rack?

Will my tires go flat?

What if I don't have the minimum clearance between the fender stays and tire?

Product Specifications

Do you have CAD details or spec sheets?

How far apart do I hang each rack?

What size masonry drill bit do I need for installing?

How many bolts do I need to install a rack?

Can I mount the Steadyrack onto the side of a van?

What if my studs aren't where I want to put my racks?

Can I install my Steadyrack to Drywall, Plasterboard or Gyprock?

Where can I install my racks?

Do I need to install the rear wheel bracket/rest?

Can the back wheel touch the ground when stowed in the rack?

What height can I mount my racks at?

Can I install them outside?

How secure have you made the folding bar and can it be latched to the frame providing a high degree of security?

What are the racks made from?

Are your products made from recycled products?

Why are your racks made in China/India?

What is the space between the two horizontal holes on the mounting plate?

What is the distance between the two vertical holes on the mounting plate?

Can I install my Steadyrack to steel?

What comes in the box with a Steadyrack bike rack?

How far out will my bike protrude when pivoted?

Is there a warranty on the Steadyrack?

Can I cancel my order?

What is your return policy?

Why hasn't my whole order been delivered together?

Where do you ship to?

Where do you ship from?

How long will my order take to arrive?

I am interested in becoming a dealer.

Why is shipping so expensive/free in some countries and not in others?

Warranty, Returns, and Shipping

Can I mount a tandem bike in a Steadyrack?Updated 4 months ago